万臻鸿
个人简历:
2005.09~2009.06 马来西亚沙巴大学化学系本科生,获理学学士学位
2009.09~2011.06 马来西亚理科大学硕士生,获理学硕士学位
2011.07~2015.06 国油科技大学博士生兼国油勘探开采(Petronas Carigali)与国油研究中心 (Petronas Research)研究人员,获理学博士学位
2015.07~2015.12 新加坡吉米李工程与模拟计算流体力学(CFD)专家
2016.04~2016.08 马尼帕尔国际大学讲师
2016.09~至今 厦门大学马来西亚分校化学工程系助理教授
2020.09~至今 英国化学工程师协会专业工程师
研究方向:
计算流体力学(CFD);毒气与易燃气体泄露研究;化工安全研究
承担科研项目:
马来西亚企业合作项目:
智能营养师支持应用程序的开发 (2017 -2020)
酒店发电机组房气流和热量分布的 CFD 模拟 (2018)
水处理厂气流和热量分布的 CFD 模拟 (2019)
射击训练中心气流和热量分布的CFD模拟 (2020.01 – 2020.05)
储罐氨气泄漏事件的CFD模拟及疏散方案。(2020.06 – 2020.10)
储存室中乙醇泄漏的 CFD 模拟以分析易燃区。(2020.11 – 2020.12)
啤酒发酵厂液氨泄漏事故的CFD模拟。(2021.01 – 2021.04)
喷水系统作为氨气泄漏缓解方案可行性研究的 CFD 建模与模拟。(2021.06 – 2021.12)
主要代表论著:
Sam Kar Yen, Lee Siong Hoong, Ban Zhen Hong. “Computational fluid dynamics (CFD) modelling on effect of fume extraction” Journal of Chemical Health and Safety, vol. 26, issues 6, pages 20 – 31, 2019. (排烟效果的计算流体动力学模拟)
Siong Hoong Lee & Thomas S. Y. Choong & Luqman Chuah Abdullah & Mus’ab Abdul Razak & Zhen Hong Ban. "Experimental and CFD Modelling: Impact of the Inlet Slug Flow on the Horizontal Gas–Liquid Separator," Energies, MDPI, Open Access Journal, vol. 12(1), pages 1-32, 2018. (实验和 CFD 模拟:卧式气液分离器入口段塞流的影响)
Z.H. Ban, K.K. Lau, and A.M. Shariff, “In-line Physical Desorption Unit – Part 1: Conceptual Design, and Numerical Analysis” Chemical Engineering Research and Design, vol. 117, pp. 792 – 809, 2017. (物理解吸装置装置 - 第 1 部分:概念设计和数值分析)
Z.H. Ban, K.K. Lau, and A.M. Shariff, “In-line Physical Desorption Unit – Part 2: Optimisation Analysis” Chemical Engineering Research and Design, vol. 117, pp. 810 – 830, 2017. (物理解吸装置装置 - 第 2 部分:优化分析)
Z.H. Ban, K.K. Lau, and A.M. Shariff, "CFD modelling of most probable bubble nucleation rate from binary mixture with estimation of components’ mole fraction in critical cluster," Continuum Mechanics and Thermodynamics, vol. 28 (3), pp. 655–668, 2016. (二元混合物中最可能的气泡成核率的 CFD 建模与临界簇中组分摩尔分数的估计)
Z.H. Ban, K.K. Lau, and A.M. Shariff, “Bubble Nucleation and Growth of Dissolved Gas in Solution Flowing Across a Cavitating Nozzle," Applied Mechanics and Materials, vol. 773-774, pp. 304-308, 2015. (流过空化喷嘴的溶液中溶解气体的气泡成核和生长)
Z.H. Ban, K.K. Lau, and A.M. Shariff, “Modelling of Bubble Growth in Supersaturated Solution using Computational Fluid Dynamics - Population Balance Model (CFD-PBM) Approach.” Defect and Diffusion Forum, vol. 362, pp. 200 – 208, 2015. (使用计算流体动力学 - 种群平衡模型 (CFD-PBM) 方法对过饱和溶液中的气泡生长进行建模)
Z.H. Ban, K.K. Lau, and A.M. Shariff, "Prediction of the bubble nucleation rate in a quasi-stable cavitating nozzle using 2D computational fluid dynamics and enhanced classical nucleation theory," Engineering Applications of Computational Fluid Mechanics, vol. 9 (1), pp. 247-258, 2015. (使用二维计算流体动力学和增强的经典成核理论预测准稳定空化喷嘴中的气泡成核率)
Z.H. Ban, K.K. Lau, and A.M. Shariff, "CFD Simulation for Bubble Nucleation Rate of Dissolved Gas." Journal of Applied Sciences, vol. 14, pp. 3369-3372, 2014.(溶解气体气泡成核率的 CFD 模拟)
Z.H. Ban, K.K. Lau, and A.M. Shariff, "Supersaturated Gas Bubble Formation Across an Orifice," Applied Mechanics and Materials, vol. 625, pp. 562 - 565, 2014. (穿过孔口的过饱和气泡形成)
Z.H. Ban, K.K. Lau, and A.M. Shariff, "Physical Absorption of CO2: A Review." Advanced Materials Research, vol. 917, pp. 134 - 143, 2014. (二氧化碳的物理吸收:综述)
A.L. Ahmad, Z.H. Ban, B.S. Ooi. Computational Fluid Dynamics Modeling High Viscous Fluid in Rotating Corrugated Spacer: Shear Stress Effect. Journal Applied Science, vol. 11, pp. 3640-3644, 2011.(计算流体动力学模拟旋转波纹垫片中的高粘性流体:剪切应力效应)
A.L. Ahmad, Z.H. Ban, B.S. Ooi. CFD Modeling of Rotating Spiral Wound Membrane with Corrugated Spacer: Shear Rate Effect. Journal of Materials Science and Engineering, vol. 5 (2), pp. 234, 2011.(带有波纹垫片的旋转螺旋缠绕膜的 CFD 建模:剪切速率效应)
A.L. Ahmad, Z.H. Ban, B.S. Ooi. A three-dimensional unsteady hydrodynamic profile of a reciprocating membrane channel. Journal of Membrane Science, vol. 365, pp. 426–437, 2010.(往复膜通道的三维非定常流体动力学剖面)
马来西亚国油科技大学博士
电子邮箱:bzhong@xmu.edu.my